Publication

Academic papers

2024

• "Investigating screw-agitator speed ratio impact on feeding performance in pharmaceutical manufacturing using discrete element method"
  Luz Nadiezda Naranjo Gómez, Kensaku Matsunami, Paul Van Liedekerke, Thomas De Beer, Ashish Kumar
  Scientific Reports 14, 21234 (2024).

  • URL
  • DOI: 10.1038/s41598-024-72288-0
• "Hybrid modeling of T-shaped partial least squares regression and transfer learning for formulation and manufacturing process development of new drug products"
  Keita Yaginuma, Kensaku Matsunami, Laure Descamps, Alexander Ryckaert, Thomas De Beer
  International Journal of Pharmaceutics 662, 124463 (2024).

  • URL
  • DOI: 10.1016/j.ijpharm.2024.124463
• "Roles of mechanistic, data-driven, and hybrid modeling approaches for pharmaceutical process design and operation"
  Mohamed Rami Gaddem, Junu Kim, Kensaku Matsunami, Yusuke Hayashi, Sara Badr, Hirokazu Sugiyama
  Current Opinion in Chemical Engineering 44, 101019 (2024).

  • URL
  • DOI: 10.1016/j.coche.2024.101019
• "Scenario Analysis of Vaccine Supply for COVID-19 in Japan Using Mathematical Models of Infectious Diseases"
  Junu Kim, Kensaku Matsunami, Yusuke Ichida, Kozue Okamura, Sara Badr, Hirokazu Sugiyama
  Journal of Chemical Engineering of Japan 57, 1, 2313318 (2024).

  • URL
  • DOI: 10.1080/00219592.2024.2313318
• "Analysis of the effect of formulation properties and process parameters on granule formation in twin-screw wet granulation"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Michael Ghijs, Eduardo Dos Santos Schultz, Mina Roudgar, Tamas Vigh, Fanny Stauffer, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 650, 123671 (2024).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123671

2023

• "T-shaped partial least squares for high-dosed new active pharmaceutical ingredients in continuous twin-screw wet granulation: Granule size prediction with limited material information"
  Kensaku Matsunami, Jonathan Meyer, Martin Rowland, Neil Dawson, Thomas De Beer, Daan Van Hauwermeiren
  International Journal of Pharmaceutics 646, 123481 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123481
• "Validation of model-based design of experiments for continuous wet granulation and drying"
  Kensaku Matsunami*, Tuur Vandeputte*, Ana Alejandra Barrera Jiménez, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Fanny Stauffer, Eduardo dos Santos Schultz, Ingmar Nopens, Thomas De Beer (*shared first authorship)
  International Journal of Pharmaceutics 646, 123493 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123493
• "Development of concentration prediction models for personalized tablet manufacturing using near-infrared spectroscopy"
  Yusuke Hayashi, Saho Okazaki, Kensaku Matsunami, Kazuya Tanabe, Takuya Nagato, Hirokazu Sugiyama
  Chemical Engineering Research and Design 199, 507–514 (2023).

  • URL
  • DOI: 10.1016/j.cherd.2023.10.009
• "Exploring the effect of raw material properties on continuous twin-screw wet granulation manufacturability"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Daan Van Hauwermeiren, Fanny Stauffer, Lærke Arnfast, Tamas Vigh, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 645, 123391 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123391
• "Partial least squares regression to calculate population balance model parameters from material properties in continuous twin-screw wet granulation"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Eduardo dos Santos Schultz, Ashish Kumar, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  International Journal of Pharmaceutics 640, 123040 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123040
• "Evaluation of the influence of material properties and process parameters on granule porosity in twin-screw wet granulation"
  Michiel Peeters, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Fanny Stauffer, Ingmar Nopens, Thomas De Beer
  International Journal of Pharmaceutics 641, 123010 (2023).

  • URL
  • DOI: 10.1016/j.ijpharm.2023.123010
• "Linking material properties to 1D-PBM parameters towards a generic model for twin-screw wet granulation"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Eduardo dos Santos Schultz, Ashish Kumar, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  Chemical Engineering Research and Design 193, 713–724 (2023).

  • URL
  • DOI: 10.1016/j.cherd.2023.04.009
• "Model development and calibration of two-dimensional population balance model for twin-screw wet granulation based on particle size distribution and porosity"
  Ana Alejandra Barrera Jiménez*, Kensaku Matsunami*, Michael Ghijs, Daan Van Hauwermeiren, Michiel Peeters, Fanny Stauffer, Thomas De Beer, Ingmar Nopens (*shared first authorship)
  Powder Technology 419, 118334 (2023).

  • URL
  • DOI: 10.1016/j.powtec.2023.118334
• "Surrogate modeling of dissolution behavior toward efficient design of tablet manufacturing processes"
  Kensaku Matsunami, Tomohiro Miura, Keita Yaginuma, Shuichi Tanabe, Sara Badr, Hirokazu Sugiyama
  Computers & Chemical Engineering 171, 108141 (2023).

  • DOI: 10.1016/j.compchemeng.2023.108141

2021

• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  Kensaku Matsunami, Alexander Ryckaert, Michiel Peeters, Sara Badr, Hirokazu Sugiyama, Ingmar Nopens, Thomas De Beer
  Processes 9, 9, 1502 (2021).

  • DOI: 10.3390/pr9091502
• "Determination of critical decision points for COVID-19 measures in Japan"
  Junu Kim*, Kensaku Matsunami*, Kozue Okamura*, Sara Badr, Hirokazu Sugiyama (*shared first authorship)
  Scientific Reports 11, 16416 (2021).

  • URL
  • DOI: 10.1038/s41598-021-95617-z

2020

• "Determining key parameters of continuous wet granulation for tablet quality and productivity: A case in ethenzamide"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Hirokazu Sugiyama
  International Journal of Pharmaceutics 579, 119160 (2020).

  • URL
  • DOI: 10.1016/j.ijpharm.2020.119160
• "Superstructure-based process synthesis and economic assessment under uncertainty for solid drug product manufacturing"
  Kensaku Matsunami, Fabian Sternal, Keita Yaginuma, Shuichi Tanabe, Hiroshi Nakagawa, Hirokazu Sugiyama
  BMC Chemical Engineering 2, 6 (2020).

  • URL
  • DOI: 10.1186/s42480-020-0028-2

2019

• "A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Hirokazu Sugiyama
  International Journal of Pharmaceutics 559, 210–219 (2019).

  • URL
  • DOI: 10.1016/j.ijpharm.2019.01.028

2018

• "Decision support method for the choice between batch and continuous technologies in solid drug product manufacturing"
  Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  Industrial & Engineering Chemistry Research 57, 30, 9798–9809 (2018).

  • URL
  • DOI: 10.1021/acs.iecr.7b05230

Peer-reviewed proceedings

2022

• "Framework for designing solid drug product manufacturing processes based on economic and quality assessment"
  Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 49, 223–228 (2022).

  • DOI: 10.1016/B978-0-323-85159-6.50037-3

2018

• "Industrial scale experiments towards the development of process evaluation models for continuous pharmaceutical tablet manufacturing"
  Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 43, 1655–1660 (2018).

  • URL
  • DOI: 10.1016/B978-0-444-64235-6.50288-6
• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products during clinical development"
  Kensaku Matsunami, Shuichi Tanabe, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  Computer Aided Chemical Engineering 44, 2131–2136 (2018).

  • URL
  • DOI: 10.1016/B978-0-444-64241-7.50350-5

2017

• "Process systems engineering approaches for drug product manufacturing: from tablets to injectables"
  Hirokazu Sugiyama, Kensaku Matsunami, Keisho Yabuta
  Computer Aided Chemical Engineering 40, 2785–2790 (2017).

  • URL
  • DOI: 10.1016/B978-0-444-63965-3.50466-9

Book chapters

2022

• "Design framework and tools for solid drug product manufacturing processes"
  Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  Optimization of Pharmaceutical Processes. Springer Optimization and Its Applications 189, 393–412 (2022).

  • DOI: 10.1007/978-3-030-90924-6_15

2020

• "固形剤の連続製造プロセス設計と経済性評価"
  Kensaku Matsunami, Hirokazu Sugiyama
  フロー合成、連続生産のプロセス設計、条件設定と応用事例, Technical Information Institute CO., LTD, ISBN 978-4-86104-820-3, 第8章 第9節 (2020).

2019

• "連続生産を対象とするプロセスシステム工学研究"
  Hirokazu Sugiyama, Kensaku Matsunami
  Continuous manufacturing of solid pharmaceutical preparations and biopharmaceutical drug substance, Hirofumi Takeuchi(Supervisor), CMC Publishing Co.,Ltd., ISBN 978-4-7813-1425-9, 130–139 (2019).

Commentaries

2022

• "Continuous manufacturing of solid drug products — from Process Systems Engineering perspectives"
  Kensaku Matsunami, Hirokazu Sugiyama
  Journal of the Society of Powder Technology, Japan 59, 8, 388–393 (2022).

  • DOI: 10.4164/sptj.59.388

2021

• "Continuous production from a process systems engineering perspective (in Japanese)"
  Hirokazu Sugiyama, Kensaku Matsunami
  化学工学会誌 (SCEJ magazine) 85, 615–618 (2021).

  • URL
• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation (written in Japanese)"
  Kensaku Matsunami
  Pharm Tech Japan 37, 1337–1338 (2021).
• "固形剤製造プロセスの経済性評価シミュレーションとツール実装"
  Hirokazu Sugiyama, Kensaku Matsunami
  化学装置 2021年1月号, 57–62 (2021).

2020

• "Simulation tool for the design of solid drug product manufacturing processes (written in Japanese)"
  Kensaku Matsunami, Hirokazu Sugiyama
  Pharm Tech Japan 36, 8, 1257–1262 (2020).
• "Conference report: 2019 American Institute of Chemical Engineers Annual Meeting (written in Japanese)"
  Kozue Okamura, Kensaku Matsunami, Haruku Shirahata, Hirokazu Sugiyama
  Pharm Tech Japan 36, 149–150 (2020).

2019

• "【Pharma PSE Spotlight】 A large-scale experimental comparison of batch and continuous technologies in pharmaceutical tablet manufacturing using ethenzamide (written in Japanese)"
  Kensaku Matsunami, Hirokazu Sugiyama
  Pharm Tech Japan 35, 8, 1533–1537 (2019).

2018

• "Continuous manufacturing of drug products from the view point of decision making (written in Japanese)"
  Hirokazu Sugiyama, Kensaku Matsunami
  Pharm Tech Japan 34, 10, 2261–2265 (2018).

2017

• "Process systems engineering research on continuous manufacturing (written in Japanese)"
  Kensaku Matsunami, Hirokazu Sugiyama
  Pharm Tech Japan 33, 12, 2619–2625 (2017).

Invited lectures

2023

• "Application of mechanistic and data-driven models to continuous tablet manufacturing with knowledge of pharmaceutical science"
  Kensaku Matsunami
  The 390th Chemical System Engineering open seminar, Department of Chemical System Engineering, The University of Tokyo, Tokyo, Japan (2023).

  • URL

International conferences

2024

• "Mechanistic and data-driven models for tablet dissolution to identify key parameters in continuous direct compression"
  (Poster) 〇Kensaku Matsunami, Alexander Ryckaert, Remco Mariën, Bram Bekaert, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  14th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 18–21 March 2024, Austria Center Vienna, Vienna, Austria (2024).
• "Novel approach integrated T-shaped partial least squares regression and transfer learning for tableting scale up"
  (Poster) 〇Keita Yaginuma, Kensaku Matsunami, Laure Descamps, Alexander Ryckaert, Thomas De Beer
  14th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 18–21 March 2024, Austria Center Vienna, Vienna, Austria (2024) (2024).

2023

• "Uncertainty analysis of hybrid modeling: A case study of partial least squares and population balance model in continuous twin-screw wet granulation"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Thomas De Beer, Ingmar Nopens
  2023 AIChE Annual Meeting, 5–10 November 2023, Hyatt Regency, Orlando, USA (2023).
• "Model-based comparison of dissolution behavior between batch and continuous direct compression manufacturing platforms"
  (Oral) 〇Kensaku Matsunami, Remco Mariën, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  2023 AIChE Annual Meeting, 5–10 November 2023, Hyatt Regency, Orlando, USA (2023).

2022

• "Two-dimensional population balance model for twin-screw wet granulation: Model development and calibration based on particle size distribution and porosity"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  2022 AIChE Annual Meeting, 13–18 November 2022, Phoenix, AZ, USA (2022).

  • URL
• "In-depth analysis of the impacts of material properties on size distributions in continuous twin-screw wet granulation to construct a generic 1D population balance model"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  2022 AIChE Annual Meeting, 13–18 November 2022, Phoenix, AZ, USA (2022).

  • URL
• "Framework for designing solid drug product manufacturing processes based on economic and quality assessment"
  (Poster) 〇Kensaku Matsunami, Sara Badr, Hirokazu Sugiyama
  The 14th International Symposium on Process Systems Engineering (PSE 2021+), 19–23 June 2022, Kyoto University Clock Tower Centennial Hall, Kyoto, Japan (2022).
• "Towards a generic population balance model for twin-screw wet granulation: from material properties to particle size distribution"
  (Oral) 〇Ana Alejandra Barrera Jiménez, Daan Van Hauwermeiren, Kensaku Matsunami, Michiel Peeters, Thomas De Beer, Ingmar Nopens
  7th International Conference on Population Balance Modelling (PBM 2022), 9–11 May 2022, Lyon, France (2022).

  • URL

2020

• "Surrogate modeling of dissolution behavior toward efficient design of tablet manufacturing processes"
  (Oral) 〇Kensaku Matsunami, Tomohiro Miura, Keita Yaginuma, Shuichi Tanabe, Hirokazu Sugiyama
  2020 AIChE Annual Meeting, 16–20 November 2020, Virtual meeting (2020).

2019

• "Economic evaluation tool for holistic design of solid drug product manufacturing processes considering continuous technology"
  (Oral) 〇Kensaku Matsunami, Fabian Sternal, Keita Yaginuma, Shuichi Tanabe, Hiroshi Nakagawa, Hirokazu Sugiyama
  2019 AIChE Annual Meeting, 10–15 November 2019, Hyatt Regency, Orlando, U.S.A. (2019).
• "Holistic and model-based design of oral drug manufacturing processes considering uncertainty in clinical development"
  (Oral) 〇Kensaku Matsunami, Hirokazu Sugiyama
  The 8th International Symposium on Design, Operation, and Control of Chemical Processes (PSE Asia 2019), 13–16 January 2019, Chulalongkorn University, Bangkok, Thailand (2019).

2018

• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products during clinical development"
  (Oral) 〇Kensaku Matsunami, Shuichi Tanabe, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  13th International Symposium on Process Systems Engineering (PSE 2018), 1–5 July 2018, Manchester Grand Hyatt, San Diego, U.S.A. (2018).
• "Industrial scale experiments towards the development of process evaluation models for continuous pharmaceutical tablet manufacturing"
  (Poster) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  28th European Symposium on Computer-Aided Process Engineering (ESCAPE-28), 10–13 June 2018, the Congress Graz, Graz, Austria (2018).

2017

• "Large-scale experimental comparison of batch and continuous technologies for pharmaceutical tablet manufacturing"
  (Oral) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  2017 AIChE Annual Meeting, 29 October–3 November 2017, Minneapolis Convention Center, Minneapolis, U.S.A. (2017).
• "Process systems engineering approaches for drug product manufacturing: from tablets to injectables"
  (Poster) 〇Hirokazu Sugiyama, Kensaku Matsunami, Keisho Yabuta
  27th European Symposium on Computer-Aided Process Engineering (ESCAPE-27), 1–5 October 2017, Fira de Barcelona, Barcelona, Spain (2017).

2016

• "Selection support methodology between batch and continuous technologies for pharmaceutical tablet manufacturing processes"
  (Oral) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  2016 AIChE Annual Meeting, 13–18 November 2016, Hilton San Francisco Union Square, San Francisco, U.S.A. (2016).

  • URL
• "Design method for pharmaceutical tablet production considering batch & continuous technologies"
  (Oral) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  The 7th International Symposium on Design, Operation & Control of Chemical Processes (PSE Asia 2016), 24–27 July 2016, The University of Tokyo, Tokyo, Japan (2016).

  • URL

Domestic conferences/Symposia

2023

• "Model-Based Comparison of Dissolution Behavior between Batch and Continuous Direct Compression Manufacturing Platforms"
  (Poster) 〇Kensaku Matsunami, Remco Mariën, Alexander Ryckaert, Bram Bekaert, Valérie Vanhoorne, Thomas De Beer, Chris Vervaet, Ashish Kumar
  CESPE Conference 2023, 21 September 2023, Ghent, Belgium (2023).

  • URL

2022

• "Model-based design of experiments in drug product development in continuous manufacturing"
  (Poster) 〇Tuur Vandeputte, Ana Alejandra Barrera Jiménez, Kensaku Matsunami, Michiel Peeters, Michael Ghijs, Daan Van Hauwermeiren, Ingmar Nopens, Thomas De Beer
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "Two-dimensional population balance model for twin-screw wet granulation: model development and calibration based on particle size distribution and porosity"
  (Poster) 〇Ana Alejandra Barrera Jiménez, Michael Ghijs, Kensaku Matsunami, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "Towards a generic model for twin-screw wet granulation: linking material properties to 1D-population balance model parameters"
  (Oral) 〇Kensaku Matsunami, Ana Alejandra Barrera Jiménez, Michiel Peeters, Daan Van Hauwermeiren, Thomas De Beer, Ingmar Nopens
  CESPE Conference 2022, 15 September 2022, Ghent, Belgium (2022).

  • URL
• "Scenario analysis of vaccine supply for COVID-19 using mathematical models of infectious diseases"
  (Poster) 〇Yusuke Ichida, Kensaku Matsunami, Junu Kim, Kozue Okamura, Sara Badr, Hirokazu Sugiyama
  SCEJ 87th Annual Meeting, 16–18 March 2022, Hybrid (Kobe University & Virtual meeting) (2022).

2021

• "Mathematical models for infectious diseases considering the impacts of mobility, therapeutic agents, and vaccines"
  (Oral) 〇Kensaku Matsunami, Junu Kim, Kozue Okamura, Yusuke Ichida, Shungo Matsueda, Sara Badr, Hirokazu Sugiyama
  SCEJ 52nd Autumn Meeting, 22–24 September 2021, Hybrid (Okayama University & Virtual meeting) (2021).

2020

• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  (Oral) 〇Kensaku Matsunami, Ingmar Nopens, Hirokazu Sugiyama, Thomas De Beer
  SCEJ 51st Autumn Meeting, 24–26 September 2020, Virtual meeting (2020).
• "Analysis of the effects of process parameters on start-up operation in continuous wet granulation"
  (Abstract only) 〇Kensaku Matsunami, Ingmar Nopens, Hirokazu Sugiyama, Thomas De Beer
  SCEJ 85th Annual Meeting (2020).

2019

• "Continuous manufacturing of solid drug products"
  (Oral) 〇Kensaku Matsunami
  ISPE Japan Affiliate Annual Meeting 2019, 30–31 May 2019, Tower Hall Funabori, Tokyo, Japan (2019).
• "Economic evaluation of solid drug product manufacturing processes considering the choice of continuous manufacturing"
  (Oral) 〇Kensaku Matsunami, Shuichi Tanabe, Keita Yaginuma, Hirokazu Sugiyama
  SCEJ 84th Annual Meeting, 13–15 March 2019, Shibaura Institute of Technology, Tokyo, Japan (2019).

2018

• "Process evaluation models for continuous tablet manufacturing based on design of experiments"
  (Oral) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  SCEJ 50th Autumn Meeting, 18–20 September 2018, Kagoshima University, Kagoshima, Japan (2018).
• "Economic evaluation of batch and continuous manufacturing technologies for solid drug products in clinical development"
  (Oral) 〇Kensaku Matsunami
  The University of Tokyo-Tsinghua University Joint Symposium 2018, 19–25 July 2018, The University of Tokyo, Tokyo, Japan (2018).
• "Design method of solid drug product manufacturing processes in clinical development"
  (Poster) 〇Kensaku Matsunami, Masahiko Hirao, Hirokazu Sugiyama
  SCEJ 83rd Annual Meeting, 13–15 March 2018, Kansai University, Osaka, Japan (2018).

2017

• "Product quality evaluation in batch and continuous manufacturing processes of pharmaceutical tablets"
  (Oral) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  Society of Chemical Engineers, Japan (SCEJ) 49th Autumn Meeting, 20–22 September 2017, Nagoya University, Aichi, Japan (2017).
• "Model 3: Decision on the choice of continuous and batch technologies in solid drug product manufacturing"
  (Oral) 〇Kensaku Matsunami
  ISPE Japan Affiliate Annual Meeting 2017 (15th Aniversary Meeting), 18–19 May 2017, Toyama International Conference Center, Toyama, Japan (2017).

  • URL
• "Product quality evaluation of batch and continuous technologies in pharmaceutical tablet manufacturing processes"
  (Poster) 〇Kensaku Matsunami, Takuya Nagato, Koji Hasegawa, Masahiko Hirao, Hirokazu Sugiyama
  SCEJ 82nd Annual Meeting, 6–8 March 2017, Shibaura Institute of Technology, Tokyo, Japan (2017).

  • URL
• "Study on the evaluation method of research impact across multiple fields"
  (Oral) 〇Koki Muraoka, Yuta Yamauchi, Naoki Nonaka, Teruaki Hayashi, Masaaki Imaizumi, Seonwoo Kim, Kensaku Matsunami, Hee-Woon Lee, Masaru Yarime
  電子情報通信学会 人工知能と知識処理研究会（AI）, 18 February 2017, Shujitsu University, Okayama, Japan (2017).
• "Decision-support methodology for the choice between batch and continuous technologies in solid drug product manufacturing"
  (Poster) 〇Kensaku Matsunami
  ETH Zürich - The University of Tokyo Strategic Partnership Symposium on Science, Design, Manufacturing, and Information,19–20 January 2017, The University of Tokyo, Tokyo, Japan (2017).

  • URL

2016

• "Process systems approaches for pharmaceutical tablet manufacturing considering batch and continuous technologies"
  (Poster) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  The 22nd SCEJ Symposium on Fluidization & Particle Processing, 8–9 December 2016, The University of Tokyo, Tokyo, Japan (2016).

  • URL
• "A bibliometric approach for comprehensive evaluation of research impacts"
  (Oral) 〇Yuta Yamauchi, Koki Muraoka, Naoki Nonaka, Teruaki Hayashi, Masaaki Imaizumi, Seonwoo Kim, Kensaku Matsunami, Hee-Woon Lee, Masaru Yarime
  The 2016 IEICE Society Conference, 20–23 September 2016, Hokkaido University, Hokkaido, Japan (2016).
• "Process systems engineering research on pharmaceutical continuous manufacturing"
  (Oral) 〇Hirokazu Sugiyama, Kensaku Matsunami
  SCEJ 48th Autumn Meeting, 6–8 September 2016, Tokushima University, Tokushima, Japan (2016).
• "Design method for pharmaceutical tablet production considering batch & continuous technologies"
  (Poster) 〇Kensaku Matsunami, Takuya Miyano, Hiroaki Arai, Hiroshi Nakagawa, Masahiko Hirao, Hirokazu Sugiyama
  SCEJ 81st Annual Meeting, 13–15 March 2016, Kansai University, Osaka, Japan (2016).

  • URL

Others

2021

• "Integrated design framework for solid drug product manufacturing processes considering continuous technology"
  Kensaku Matsunami
  PhD dissertation, Department of Chemical System Engineering, the University of Tokyo (2021).

  • DOI: 10.15083/0002006833